Roof Lifespan Comparison

Also known as roof life expectancy · how long roofs last · roof service life

Typical service lives of common roofing materials, from asphalt shingles and membranes to tile, slate and metal, and what shortens or extends them.

2 min read3 sourcesGlobalNorth America
Cite this entry"Roof Lifespan Comparison." roof.wiki. https://roof.wiki/roof-lifespan-comparison/ (accessed 2026-11-02).
Asphalt 3-tab (InterNACHI)
About 20 years
Architectural asphalt (InterNACHI)
About 30 years
Metal (InterNACHI)
40-80 years
Slate (InterNACHI)
60-150 years
Clay/concrete tile (InterNACHI)
100+ years

How long a roof lasts depends on the material, the quality of installation, the climate, maintenance, ventilation and exposure to storms. Published figures are estimates, not promises, and different sources give different ranges. The figures below come from InterNACHI's estimated life expectancy chart for homes unless stated otherwise; InterNACHI cautions that they are guidelines only and notes that hot climates drastically reduce asphalt shingle life.

Eave · starter course first Courses go on fromthe eave up. Each onecovers the nails below;joints are offset.
How shingles are laid

Estimated life expectancy (InterNACHI)

Material Estimated life (years)
Asphalt shingles, 3-tab 20
Asphalt shingles, architectural 30
Wood 25
Fibre cement 25
Simulated (synthetic) slate 10-35
Clay or concrete tile 100+
Slate 60-150
Metal 40-80
Copper 70+
Built-up roofing (BUR) 30
Modified bitumen 20
EPDM 15-25
TPO 7-20
Green (vegetated) roof 5-40
Aluminium coating 3-7

Other published estimates

  • Commonly cited figures are 15-18 years for three-tab asphalt shingles and 24-30 years for dimensional shingles, about 25 years overall for a typical asphalt shingle roof.
  • A US General Services Administration review estimated about 40 years for a green roof membrane versus about 17 years for a conventional low-slope roof, because vegetation protects the waterproofing.

What shortens roof life

  • High heat and UV exposure, especially for asphalt and polymers;
  • Poor attic ventilation and air leakage, which overheat or wet the deck;
  • Hail, high winds and wildfire exposure;
  • Freeze-thaw cycles for porous materials;
  • Coastal salt for some metals and fasteners;
  • Ponding water on low-slope roofs;
  • Poor installation, especially fastening and flashing errors.

What extends it

Regular inspection, keeping gutters and drains clear, prompt repair of flashings and sealants, recoating where appropriate, and protecting membranes from foot traffic all help roofs reach or exceed typical estimates.

Lifespan versus component life

The covering may outlast other parts of the roof. Tile and slate can last a century, but underlayments, battens, flashings and fasteners often need renewal sooner. Lifespan comparisons should therefore consider the whole roof system.

head lap Rafter + battens Slates hang in courses from the eave up.Each is nailed (or hooked) to a batten andreaches two courses up, so there are alwaysat least two thicknesses over the roof.
How slates are fixed

Sources

Reviewed 2 November 2026 · 3 sources · Editorial policy · Plain-text version · Suggest a correction

  1. Asphalt shingleWikipedia · en.wikipedia.org

From the community

Know this topic first-hand? Share a photo you took, a correction with a source, or local knowledge. Every contribution is reviewed before it appears.

Contribute to Roof Lifespan Comparison

Sign in with your email. We'll send a one-time link; no password needed.